Price | ||
TR-55i-mA |
Property |
Measurement Range: 0 to 20 mA (Operational up to 40 mA) Input Module (AIM-3010) Included |
Usability |
|
Attribute |
|
TR-55i-TC | TR-55i-Pt | TR-55i-V | TR-55i-mA | TR-55i-P | |
Measurement Channels | Temperature 1ch | Temperature 1ch | Voltage 1ch | 4-20mA 1ch | Pulse Count 1ch |
Sensor |
Thermocouple Type: K, J, T, S |
Pt100, Pt1000 (3 wire) | - | - | - |
Measurement Units | °C, °F | °C, °F | V, mV | mA | P |
Measurement Range | -199 to 1700 °C | -199 to 600 °C | 0 to 22 V |
0 to 20 mA (Operationalup to 40 mA) |
Input Signal: ・Non-voltage Contact Input ・Voltage Input (0to27V) Detection Voltage Lo: 0.5 V or less Hi: 2.5V or more Input Impedance: Approx. 100 KΩ pull up Chattering Filter: ON: 15 Hz or less OFF: 3.5 kHz or less |
Accuracy(*1) | Thermocouple Measurement
±0.3°C + 0.3 % rdg [Type K, J, T] ±1°C +0.3%rdg[Type S]Cold Junction Compensation ±0.3°C [10 to 40°C] ±0.5°C [-40 to 10°C / 40 to 80°C] |
±0.3°C + 0.3 % rdg [10 to 40°C] ±0.5°C + 0.3 % rdg [-40 to 10°C / 40 to 80°C] |
±0.5 mV + 0.3 % rdg [10 to 40°C] ±1 mV + 0.5 % rdg [-40 to 10°C / 40 to 80°C] |
±0.05 mA + 0.3 % rdg [10 to 40°C] ±0.1mA + 0.3 % rdg [-40 to 10°C / 40 to 80°C] |
Maximum Count 61,439 / Recording Interval |
Note: The above temperatures [__°C] are for the operating environment of the Input Module. | |||||
Measurement Resolution |
Type K, J, T : 0.1 °C Type S : Approx. 0.2 °C |
0.1 °C | up to 400mV: at 0.1mV, up to 800mV: at 0.2mV, up to 999mV: at 0.4mV, up to 3.2V: at 1mV, up to 6.5V: at 2mV, up to 9.999V: at 4mV, up to 22V: at 10mV |
0.01 mA | |
Logging Capacity | 16,000 readings | ||||
Recording Interval | Select from 15 choices: 1, 2, 5, 10, 15, 20, 30 sec. or 1, 2, 5, 10, 15, 20, 30, 60 min. | ||||
Recording Mode | Endless (Overwrite oldest data when capacity is full) or One Time (Stop recording when capacity is full) |
||||
LCD Display Items | Measurements, Recording Status, Battery Life Warning, etc. | ||||
Communication | Optical Communication (proprietary protocol) | ||||
Interfaces | Infrared(IR) Communication (IrPHY 1.2 low power) | ||||
Power(*2) | Lithium Battery (LS14250) x 1 | ||||
Battery Life(*3) |
Approx. 14 months (10 months with IR Communication Enabled) |
Approx. 24 months (14 months with IR Communication Enabled) |
Approx. 16 months (11 months with IR Communication Enabled) |
Approx. 16 months (11 months with IR Communication Enabled) |
Approx. 16 to 24 months (11 to 18 months with IR Communication Enabled) |
Dimensions | H 62 mm x W 47 mm x D 19 mm (excluding protrusions and Input Module) | ||||
Weight | Approx. 55 g (including battery / excluding Input Module) | ||||
Operating Environment | -40 to 80 °C | ||||
Waterproof Capacity(*4) | IP64: Splash proof (rated for use in daily life) Note: Input Module is not water resistant. | ||||
Accessories | Input Module (TCM-3010) |
Input Module (PTM-3010) |
Input Module (VIM-3010) |
Input Module (PIC-3150) |
|
Lithium Battery (LS14250), Strap, User's Manual (Warranty Included) | |||||
Data Collection Devices |
Communication Port: TR-50U2, TR-50U Data Collector: TR-57DCi |
(*1) "rdg" stands for reading.
(*2) The included lithium battery (LS14250) is not sold in stores. Please purchase the optional battery set (TR-11P2) for replacement.
(*3) Battery life varies depending upon the ambient temperature in which it is used, the recording interval, the frequency of communication, and the battery performance.
All estimates are based on operations carried out with a new battery and are in no way a guarantee of actual battery life. When the infrared communication function is enabled,
battery life may be shortened further if the unit is used under the inverter type fluorescent lighting.
(*4) This is the waterproof capacity of the data logger with the Input Module connected.